TousLesDrivers.com - Téléchargement gratuit de mises à jour PC (drivers, BIOS, firmwares, applications)

Accueil / Overclocking

Rechercher

S'inscrire ou s'identifier

FAQ

Identification

Nom d'utilisateur

Mot de passe

Recevez vos identifiants par e-mail si vous les avez oubliés.

Inscrivez-vous si vous n'êtes pas encore membre de TousLesDrivers.com.

Modifier le message

Message

nouveau test :

Extreme Tweaker

Ai Overclock Tuner [Manual]
OC From Memory Level Up [Auto]
FSB Frequency [400]
CPU Ratio Setting [10]

> CPU configuration
CPU Ratio Setting [10]
C1E Support [Désactivé]
CpU TM Function [Désactivé]
Max CPUID Value Limit [Désactivé]
Vanderpool Technology [Désactivé]
Execute Disable Bit [Désactivé]
Core MultiPprocessing [Activé]

* CPU clock skew [Auto]
* NB clock skew [Auto]
FSB Strap to North Bridge [400]
PCIE Frequency [101]
DRAM Frequency [ddr3 - 1600mhz]
DRAM Command Rate [1N]****NEW*******
DRAM Timing Control [Manual]

1st information
CAS# Latency [6]
RAS# to CAS# Delay [8]
RAS# PRE Time [6]
RAS# ACT Time [24]
RAS# to RAS# Delay [Auto]
REF Cycle Time [Auto]
WRITE Recovery Time [Auto]
READ to PRE Time [Auto]

2nd information
READ to WRITE Delay(S/D) [Auto]
WRITE to READ Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ to READ Delay(S) [Auto]
READ to READ Delay(D) [Auto]
WRITE to WRITE Delay(S) [Auto]
WRITE to WRITE Delay(D) [Auto]

3rd information
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]

DRAM Static Read Control [Auto]
DRAM Dynamic Write Control [Auto]

> DRAM Skew Control :
DRAM CMD Skew on Channel A [Auto]
DRAM CLK Skew on DIMM A1 [Auto]
DRAM CLK Skew on DIMM A2 [Auto]
DRAM CTL Skew on DIMM A1 [Auto]
DRAM CLT Skew on DIMM A2 [Auto]

DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on DIMM B1 [Auto]
DRAM CLK Skew on DIMM B2 [Auto]
DRAM CTL Skew on DIMM B1 [Auto]
DRAM CTL Skew on DIMM B2 [Auto]

Ai Clock Twister [Moderate]
Ai Transaction Booster [Manuel]

Common Performance Level [07]******NEW*****

Pull in of CHA PH1 [Désavtivé]
Pull in of CHA PH2 [Désactivé]
Pull in of CHB PH1 [Désactivé]
Pull in of CHB PH2 [Désactivé]

EPU II Phase Control [Auto]

*** Please key in numbers or select voltage!***
CPU Voltage [1.33]*****NEW******
Load-Line Calibration [Activé]
CPU PLL Voltage [1.55]
FSB Termination Voltage [1.31]
CPU GTLVref(0) [+50mV]
CPU GTLVref(1) [+50mV]
CPU GTLVref(2) [+50mV]
CPU GTLVref(3) [+50mV]
NB GTLVref [+40mV]
North Bridge Voltage [1.45]
DRAM Voltage [1.65681]
NB DDRVref [Auto]
DDR3 Channel A Vref [Auto]
DDR3 Channel B Vref [Auto]
South Bridge 1.5 Voltage [1.51106]
South Bridge 1.05 Voltage [1.06039]

******************************************
CPU Spread Spectrum [Désactivé]
PCIE Spread Spectrum [Désactivé]

alors toujours stable dans les jeux mais occt de m... et son coin coin arf même pas j'ai droit au ecran bleu ! je commence a croire que ça vaut rien occt ou sinon y a un truc qui cloche là .... non?

Insérer des éléments

Plus de smileys

Lien N°1 / Lien N°2 / Puce / Gras / Italique / Souligné / Barré